Slash Program Overview

Slash Permits

Wildland Fire Protection Plan, Slash Disposal Program Policy


The primary objective of the slash disposal program is to assist Village property owners in their wildfire preparedness. The Village is committed to becoming a Fire Adapted Community and taking action to reduce wildfire risks throughout the community before a wildfire occurs.

Village of Angel Fire Investment

The Village of Angel Fire governing body, working with the administration and staff, have invested in these objectives by allowing Angel Fire property owners to dispose of secured loads of slash without additional disposal fees. Property owners may choose to hire a contractor to transport their slash to the Transfer Station.

In order to qualify for the disposal of slash with no additional fees if having a contractor haul his slash to the Transfer Station, the property owner and or contractor must secure a Slash Disposal slip from Village Hall. The following information is required in order to process the permit and verify eligibility for slash disposal at the Village Transfer Station on a no additional fee basis (Delivery must comply with applicable requirements below):

  • Name of legal owner of property
  • Name of person, including business name if applicable, delivering the slash and his or her telephone number.
  • Physical Address of the lot (P.O. Box number does not qualify)
  • Property owners phone number

This information will be randomly verified and lots may be inspected to ensure compliance and discourage unauthorized slash disposal from non-qualifying properties. In addition, the rules set out herein must be complied with.

The property owner or contractor must obtain the following prior to cleaning up any lot:

  • A permit
  • Copy of the Slash Policy


All lots being thinned must have a Permit visibly displayed on a tree or stake near roadway or entrance to the property and must remain on the lot until all work is completed and all slash removed. Permit must have the following information:

  • Date
  • Address
  • Lot number
  • Property owners name
  • Property owners phone number
  • Contractors name or business name
  • Contractor telephone number

Slash Policy

Information and rules pertain to slash and its disposal.

Pick up Program

The slash pick up program starts April 1st and ends October 15th. Angel Fire property owners may also utilize the Village’s services in picking up and disposal of slash from their properties. All property owners wishing to utilize these services must call the Public Works office at 575-377-7004.

Some properties will not be suitable to participate in the pick-up service provided by the Village due to the property location, topography, right-of-way restrictions, obstructions and/or an unsafe condition. A site inspection will determine if the slash material can be safely picked up.

All property owners and/or contractors must contact the Public Works office prior to placing slash material within the Village right-of-ways. Slash placed within or on Village right-of-ways without Village permitting, knowledge and or consent is illegal dumping or littering and may be subject to citations, fines and/or penalties.

When a violation of this policy occurs, a pick-up fee of $15/cubic yard will be accessed to the property owner or contractor. If any damage occurs to Village Row or Roadway because of slash placement the property owner and/or contractor will be responsible for cost of repairs.

Important points to remember are:

  • Pick-up service is for slash only. If slash has any of the following items, the slash will not be picked up and the contractor or property owner will have to dispose of the pile or remove the items:
    • Construction debris
    • Dirt
    • Pine needles
    • Rocks
    • Stumps
    • Trash of any kind
  • We currently cannot handle slash that is greater than twelve inches in diameter and/or greater than eight feet in length.
  • Slash must be neatly stacked within fifteen feet of the public road due to the length of the grappler arm and must not be on the road or obstructing any Village right of way to include ditches and drainage areas. If not sure of placement of slash, call for site inspection.
  • Slash piles must be no greater than ten feet long with slash piled parallel to the roadway in a single direction. Multiple piles will be spaced with two feet spacing between piles.
  • Slash piles may not be placed directly under power lines or on top of any exposed ground cables.
  • Slash piles will not be placed within four feet of water meters and/or cable, telephone, broadband or electric pedestals.
  • Slash material that can be picked up with the grapple will be removed; any small sized material beyond the capability to be picked up by the grapple that is left behind will be the lot owner’s responsibility to clean up and dispose.
  • Owner’s properties that do not have a suitable location for the piling of slash will be required to transport their slash to the transfer station.
  • No slash shall be brought out to right-of-ways for pickup after October 15th.
  • Clean up: The property owner or contractor is responsible for cleanup of the slash pile.
  • If the property owner or contractor need to thin a lot between October 15th and April 1st, the slash must be kept within the lot boundaries and not placed in the easement. It may be brought out for pickup after April 1st or slash can be hauled into the transfer station by the property owner or contractor when conditions allow the slash pit to be open.

Larger Branches & Tree Trunks

All tree trunks and limbs over five inches in diameter but less than twelve inches in diameter (if not kept by the homeowner or contractor) must be delimbed and cut into no greater than eight feet lengths. Once delimbed and blocked to less than eight feet in length, the large branches and tree trunks must be piled separate from the smaller slash material.

As with other slash piles, these stacked timber piles must be no greater than ten feet long with slash piled parallel to the roadway in a single direction. Multiple piles will be spaced with two feet spacing between piles.

Slash From Outside The Village of Angel Fire Limits

No slash is accepted from outside Village limits at this time..

Contractors Hauling Slash

Homeowners may either need to or elect to retain a contractor to thin their property and/or transport their slash to the Transfer Station. Prior to delivering the first load, the homeowner or his agent must obtain a permit from Village Hall for his contracted thinning effort. This permit will verify the eligibility for free disposal.

The permit must accompany the first load by the contractor, and will be retained by Transfer Station personnel throughout the duration of the contract.

Property Owner Hauling Their Own Slash

A property owner hauling their own slash to the Transfer Station must obtain a permit with an address, amount of slash and a signature before bringing it to the transfer station.

Delivery of Slash Material to the Transfer Station

The following rules and requirements apply to everyone transporting slash material to the Transfer Station per Resolution 2013-10:

  • Loose pine needles: Loose pine needles are not considered to be in the slash pickup program, and must be bagged and hauled to the Transfer Station. Pine needles from properties located in the Village Limits will be handled at  rate of $5 per cubic yard.
  • Secured Load: All loads delivered to the Transfer Station must be completely covered with a tarp and/or strapped as to prevent any material from falling onto the roadways; this includes the tailgate area on both trucks and trailers.
  • Slash Mixed with Other Debris: Loads of slash mixed with other debris must be unloaded inside the Transfer Station at a fee of $15 per cubic yard depending on the material. We strongly advise not to bring mixed loads!
  • Slash Only: Slash loads must contain only qualified slash disposable material; no pine needles, stumps, construction debris, dirt, rocks, or trash of any kind.
  • Stumps, Rocks, Dirt: Loads containing stumps, rocks, and/or dirt are not included in the slash program, and will be charged a minimum of $20 per cubic yard depending on the amount of contamination.
  • Unsecured slash and pine needle loads arriving at the Transfer Station will be subject to a $5 per cubic yard regardless of property of origin. Unsecured loads may be subject to additional fines and penalties by law enforcement.

Unloading at Slash Pit

  • No smoking is allowed anywhere on the Transfer Station property, including the slash pit.
  • Children and pets must remain inside your vehicle for their safety while at the Transfer Station and/or Slash Pit.
  • Please drive slowly and carefully while at the Transfer Station and slash pit.
  • Do not enter the slash pit until the Transfer Station Attendant has inspected your load and you have completed the required paperwork.


Slash is accepted Monday through Friday between the hours of 7 a.m. to 3 p.m., no exceptions.